Description
Direct solenoid operated,spool type, mounting on ISO 4401-03-02.
Five chamber body and spool design provides low-pressure drop, with maximum performance.
Balanced spool design ensures proper shifting force for maximum reliability and long life.
All spools and bodies are interchangable, simplifying maintenance.
Wet pin DC solenoids ensure better heat dissipation, quitter operation, there by increasing solenoid life.
Moulded solenoid coils eliminate moisture problems and
ingress of dust.
Plug-in-coils for ease of maintenance.
Indicator lights are a standard feature.
Solenoid Operated Directional Control Valve DE06 (CETOP 03)
Section

Unit Dimensions

Technical Specifications
Hydraulic :
Construction Spool type.
Mounting type Subplate body as per ISO 4401-03-02.
Mounting position Optional.
Operating Pressure For Ports P, A, B  ............ 315 bar
      Port  T   .................... 150 bar.
(For spool type A & B, port T to be used as a drain line, if the operating pressure exceeds 150 bar.)
Nominal flow handling capacity 63 lpm.
Maximum flow handling capacity Refer graph.
Flow direction Refer spool chart.
Hydraulic medium Mineral oil.
Viscosity range 10 to 380 cSt.
Working temperature range -20 C to +70 C.
Fluid cleanliness requirement As pe ISO code 16/13 or better.
Weight Valve with single solenoid ....... 1.2 kg.
Valve with double solenoid ...... 1.8 kg.
Electrical :
DC Voltage 24 V.
AC Voltage 220 V - 50 Hz.
Power requirement 30 W.
Duty cycle Continuous.
Switching time  (ON)  ....  40 ms.,  (OFF) .... 30 ms.
Max. ambient temperature 50 C 
Max. allowable coil temperature 100 C
Max. switching frequency 15000/hour
Insulation IP 65

Note :   AC solenoid coil is basically a DC coil with built-in rectifier.    

 

Performance Curves

Oil used : ISO VG 68, Test temp. : 50 C

  

Table showing the relation between the spool type, direction of 
flow and curve in the above graph to be referred to.

Spool Type Direction of flow / Curve No.
P to A P to B A to T B to T P to T
A 4 4 -- -- --
B 4 4 -- -- --
C 4 4 5 2 --
D 4 4 5 2 --
E 3 3 5 5 --
F 1 3 1 3 --
G 6 6 6 6 7
H 1 1 2 2 4
J 3 3 2 2 --
L 3 3 2 5 --
M 1 1 5 5 --
P 3 1 3 1 --

 

Ordering Informations

Service Ports
Directional control valve solenoid operated DE
Size 06
Spool type refer chart
Spool position (Detent for 2 pos. valves only)
Coil Voltage

Option for converting 3 position valve to 2 position.

Design Code Subject to change.
Installation dimension remain same
for design code 01 thru 09
01

Product Code

All rights reserved.
Subject to revision.

Regd. office & Works :
78-80, Machhe Industrial Estate, Machhe, Belgaum - 590 014. Karnataka, INDIA. 
Phone :
+91-0831-2411001.  Fax : +91-0831-2411002 ,  
E-mail :
 
polyhydron@vsnl.com ,  Website :  www.polyhydron.com

 

Copyright Polyhydron Pvt. Ltd. Belgaum, India.
Site developed by
Polyhydron Pvt. Ltd, Belgaum, India.

Updated on May 11, 2010 05:39 pm .