Description
Flow divider valves provide dual flow from a single source at a predetermined ratio, regardless of load. Maximum dividing error is < 5% Threaded port body. Flow divider valve
Section

Unit Dimensions

Technical Specifications
Construction ............................... Pressure compensated spool type.
Mounting type ............................ Threaded body.
Mounting position ....................... Horizontal.
Pressure drop across valve ........ Refer graph.
Dividing accuracy ....................... 5%
Fluid ........................................... Mineral oil.
Fluid temperature range ............. -20 C to +70 C.
Fluid cleanliness requirement ..... As per ISO 16/3 or better.
Flow range .................................. Refer ordering code
Operating pressure ..................... 315 bar.
Mass .......................................... Model

FDTAA*

FDTAB*

FDTAC*

FDTAD*

Mass Kg.

2.5

2.5

2.5

5

 

Performance Curves

Oil used : ISO VG 68, Viscosity : 68 cSt @ 40 C, temp. @ test : 35 C.

Ordering Informations

 

Flow Divider FD
Threaded port T
Dividing ratio 50 : 50 A
Inlet flow l/min.
Design Code 01

Product Code

 

All rights reserved.
Subject to revision.

Regd. office & Works :
78-80, Machhe Industrial Estate, Machhe, Belgaum - 590 014. Karnataka, INDIA. 
Phone :
+91-0831-2411001.  Fax : +91-0831-2411002 ,  
E-mail :
 
polyhydron@vsnl.com ,  Website :  www.polyhydron.com

 

Copyright Polyhydron Pvt. Ltd. Belgaum, India.
Site developed by
Polyhydron Pvt. Ltd, Belgaum, India.

Updated on May 11, 2010 05:18 pm .